  SPECIALIZED MACHINE
The automatic machine with NC management for production of grooves for locks and a loop of doors and frames since the different sizes. The machine is characterized about a short cycle of work, management on 3 axes, motors with high frequency, a drive about servomotors and pneumatic a coupler of preparation.
|
STANDARD PERFORMANCE |
LBM – NC1 |
|
|
|
|
Data for workable doors and frames: |
|
|
The maximal breadth on workable doors, mm |
900 |
|
The minimal breadth on workable doors, mm |
500 |
|
The maximal length on workable doors, mm |
2200 |
|
The maximal thickness on workable doors, mm |
40 |
|
The maximal thickness on frames for a door, mm |
150 |
|
|
|
|
Boring heads for working on jacks for a loop: |
|
|
Pieces |
3 |
|
Tilting of the heads |
0° - 12° |
|
Revolutions of the motors, min-1 |
18 000 |
|
Power of the motors, kW |
0,41 |
|
Diameter on cutting tools, mm |
ø14 |
|
|
|
|
Boring a head for working on jacks for the lock: |
|
|
Pieces |
1 |
|
Revolutions of the motor, min-1 |
12 000 |
|
Power of the motor, kW |
0,75 |
|
Diameter on cutting tool, mm |
ø14 |
|
|
|
|
Boring a head for working on apertures for the lock: |
|
|
Pieces |
1 |
|
Revolutions of the motor, min-1 |
12 000 |
|
Power of the motor, kW |
0,55 |
|
Diameter on cutting tool, mm |
ø14 |
|
|
|
|
The general specifications: |
|
|
The maximal pressure of air, bar |
6 |
|
Diameter on a tip for aspiration, mm |
ø120 |
|
The general equipped power, kW |
3,67 |
|
The necessary area, mm |
2000x3000 |
|
Weight, kg |
~600 |
|
