One-side edge banding machine - right execution. Edge's support - up to ø 600 mm. Gluing part for granulated melting glue. Glue tank under melting roller. Apply the glue by means of glue roller in a direction identical as the piece direction without need of adjusting towards material's thickness. Electronic regulation of the glue temperature.  For edge from rollers 0.4 ÷ 3 mm. For stripes 0.4 ÷ 5 mm (it depends on the material), hand feeding of stripes. A guillotine for preliminary cutting of thick PVC /ABS edges max. 3 x 45. Squeezing area: driven pressing roller with pneumatics as well as two free moving conical rollers for additional pressure for congestion for upper and lower glue gap. Central manual adjustable upper squeezing. Transport system with chain. Supporting plates with width 73 mm. Pressing rollers are made of rubber with diameter ø70 mm mounted onto a bearing. Unit for exact edging over the measures of the edging in the front and rear side of the piece. Exact linear guiding with orthogonal movement of the edging discs. One motor with two edging discs with dimensions ø80 x ø20 x 2,4 mm. Unit for upper and lower milling with vertical and horizontal adjustment with one motor and milling heads  ø 75mm, Z = 4; 15, R2 or R3 mm.  Supporting beam  movable with rollers - from 0 to 500 mm. Control panel at the front side of the machine. Environment temperature: + 18° max + 35°C.