home about us machines contacts query EDGE BANDERS KZM 1 The machine is designed for edges sticking, which are covered with glue in advance, on straight panels, for edges with thickness from 0.4 mm to 1.5 mm and panel thickness from 10 mm to 45 mm. Automatic cutting of edge’s extras at both panel sides and removing the surplus parts of the edge up and down of the workable panel. There is a stand for the roller with edge, digital indicator of feeder for height adjustment, electronic regulation of the temperature and analog thermometer, movable widen base for edge sticking of wider panels, compressed air regulator. Details » KZM 2 The machine is designed for edge sticking of straight panels ,it is with automatic panel feeding and direct covering with glue for edges with thickness from 0.4 mm to 3 mm and panel thickness from 10 to 45 mm .Automatic cutting of edge’s extras at both panel sides and removing the surplus parts of the edge up and down of the workable panel. There are digital indicators of fence, of milling cutting device, of feeder for height adjustment, electronic regulation of glue temperature with microprocessor and digital thermometer , movable widen base for edge sticking of wider panels, compressed air regulator. Details » KZM 3 The machine designed for will stick round edges to a plane about rectilinear and curvilinear surfaces, for edges with thickness from 0,4 mm up to 3,0 mm and thickness plates from 10 mm up to 60 mm. Submission plates basically is carried out manually as they the edge and a leading roller nestles to stuck round. For submission rectilinear preparations the stipulated option for use and automatic feeders. The stipulated: support under a roll with an edge, electronic regulator of temperature of glue with the microprocessor and digital the thermome-ter and regulator of hot air. Details » KZM 4 One-sided edge-binder machine – right design. Edge carrier up to ø 600 mm. Edge guide – with special polyurethane belt – adjusted for an edge of rollers and edging. Gluing part for granulated melting glue. Glue tank under melting roller. Details »   KZM 5 One-side edge banding machine right execution. Edge's support - up to ø 600 mm. Gluing part for granulated melting glue. Glue tank under melting roller. Apply the glue by means of glue roller in a direction identical as the piece direction without need of adjusting towards material's thickness. Details »           WebDesignBG   ZMM STOMANA   ·   Silistra, Bulgaria   ·   +35986 / 821 058   ·   +35986 / 821 071